What are the reasons for the failure of silicone products?baby pacifier feeder Factory

　　Many friends will choose different brands of products or silicone products produced by different suppliers when purchasing silicone products, but choose different products and products of different quality. How much do you know about high-quality products and low-quality products when purchasing products? Silicone rubber product is a kind of formulation that contains a variety of inorganic compounds combined with mixing and silica powder combined with appropriate natural resin formulations. It not only has high-quality practicability and reliability, but also uses some low-quality or low-cost raw materials. It will greatly reduce the quality of silicone products, resulting in reduced product quality and reduced life expectancy.

　　Generally, high-quality products have very strong life and adaptability. Under non-artificial conditions, they can be used in various high and low temperature occasions and unstable occasions, such as high temperature within 200 degrees and low temperature below -40 degrees or oil pressure, and ozone is relatively heavy. Long-term use to maintain a good life and the number of times of use, and no deformation, lack of tension will not damage in the process of use, etc., and low-quality silicone products can also be used, but the difference between low-quality products is that The raw materials and vulcanizing agents used are different, so the difference between high and low quality products can be judged under the same environment.

　　Nowadays, many industrial electronic accessories are replaced by silicone rubber products, so that many silicone products are made of low-quality raw materials in mass production. However, a certain effect has been achieved, but regardless of whether the product is practical or not, many products are available in the market. Feedback from consumers is that the service life of the product is too short, the pulling force is insufficient, and the product is sticky. However, these materials are caused by silicone raw materials. In the raw materials, in order to ensure the smooth surface of the product, too much silicone oil is added to control the viscosity, and silicone oil is added. Too much silicone oil destroys the composition of silicon atoms, resulting in insufficient product lift. The service life declines, and many products become low-quality products with performance degradation!

Read recommendations:

Discrimination diagram of flat head pacifier.packaging for pacifier clip

Silicone block building blocks

Silicone baking tray mat

baby pacifier clip manufacture

bibs baby pacifier Processing