Introduction of silicone product sample mold!baby pacifier mask Factory

　　Molds are basically familiar to many industries. For an important part of making various rubber and plastic materials, we are now using more and more molds in many industries, and molds are crucial for the silicone product industry. An important design is related to the structure, shape and quality of a product. It is also indispensable in the production of silicone products. New products are developed through molds, but many customers are unaware of sample molds. However, the sample mold is also a necessary process for the silicone industry, which is also for the sake of your products.

　　When we receive customer inquiries, when customer service sends 3D drawings and samples, if we can do it, but there is no mold, we will let the customer open mold production. In the early stage of mold opening, in order to receive good products, we will open one first. The sample mold is used as the sample to design a reasonable mold with CAD software through 3D drawing. First, let the customer get a satisfactory sample and then proceed to the development of the mold. If the sample mold is confirmed, a single-hole or double-hole sample mold will be developed. The produced samples need to be tested in various ways, such as the toughness of the samples, whether the hardness is suitable in the process of use, the adaptation of temperature, the choice of color and the confirmation of some properties.

　　Therefore, in the silicone product industry, the customer's understanding of the sample will be better confirmed. If the production and processing of large molds are carried out at the beginning, when there are various problems in the production process, such as defective products and unqualified molds, it is also a problem for customers. It is irresponsible, and the cost of opening a sample mold is several times lower than the price of a large mold. If it is in mass production, the sample mode must be developed, and it must be based on the real object produced by the sample mold and the customer. Only by the described acquaintance can the production of the product be done well. This is also a way to confirm the quality of the product. If there is a problem with the sample, then choose the repair mold to meet the requirements, and then carry out the development and production of the large mold, so as to achieve a good confirmation.

Read recommendations:

What are the factors that cause the insufficient resilience of silicone products?baby pacifier feede

Fire boy teether

Finger toothbrush

baby pacifier mask manufacturer

baby pacifier clip Processing