Do you know what happens when the silicone tubing is too brittle?baby bottle holder Factory

　　Silicone tube strips are a type of industrial and daily necessities that we commonly use at present. Products such as silicone tubes and silicone waterproof strips are widely used. They have achieved a certain connection effect in the protection of many electrical connectors and water pipes, but the products are too soft or hard and soft. If the hardness does not meet the use effect, it may lead to different problems, and the hardness and softness and the performance of the product determine its quality problems, which will also lead to such problems in the production process of silicone tube manufacturers, such as the product is too soft or too brittle.

　　Products such as silicone strips are generally used for forced extrusion to achieve sealing protection, so if there is a problem with the softness of the product, it is likely to cause some functional defects. It can be regulated during the production process, and the specific deployment method still needs to be determined according to the requirements of the product and the efficiency of production

　　Time and temperature are the main problems in controlling silicone products. In the process of high temperature vulcanization, the mold is in the state of heating and curing. If the time and temperature are not properly controlled during curing, the hardness and softness of the product will be different, and the product will be soft or too brittle. Usually, the silicone extrusion tube is formed at an instant high temperature, so the temperature control of the silicone manufacturer and the time of the strip need to be strictly controlled, and it is determined according to the thickness and wire diameter of the product, and certain parameters are prepared. no need to modify

　　If the molding method is adopted, it is necessary to control the time of mold release at all times. Silicone tube molding needs to control a certain temperature and manually control the time of mold release and the actual stay. Extruding silicone strips is just a matter of adjusting parameters and waiting. The product can be released from the mold, so usually the soft or hard problems of the molded silicone products also occupy the majority.

　　The long processing time of the silicone strip causes the product to become brittle and prone to the following phenomena:

　　1. Silicone tube strips are easy to break, and deformation or gap occurs when they are squeezed or stretched for a long time.

　　2. The product is not easy to bend, it is easy to break after long-term bending, and it cannot be used for long-term stress sealing transmission.

　　3. The rebound difference is not affected by the force, the stretching and rebound force is reduced, and the contraction effect is not good when the force is not applied, and the hand deforms after long-term use.

　　4. The use effect is not good, the actual functionality cannot be achieved, it is not suitable for the environment, and the long-term use cannot reach the actual service life range.

Read recommendations:

Precautions for the processing of silicone seals with diameters below 3mm!teethers silicone sales

Football bottle

Silicone 360 training toothbrush

baby pacifier clips manufacturer

pacifier chain gold manufacture